FK215 One Step Cleaner & Surface Sealant Process to be done in Shade:

Home/About Us Forums BBimpex Forum FK215 One Step Cleaner & Surface Sealant Process to be done in Shade:

This topic contains 0 replies, has 1 voice, and was last updated by Sanjay Sanjay 1 year, 5 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #127
    Sanjay
    Sanjay
    Keymaster

    sanjay said:

    Nov 23, 2010
    Posts: 41

    March 1, 2012 9:23 PM

    FK215 One Step Cleaner & Surface Sealant Process to be done in Shade:
    ————————————————————————————

    FK215 will clean the old degraded compounds, waxes etc on car paint to give a clean surface for other new compounds (polishes, Glazes) & synthetic or natural Waxes to be used on paint. Remove minor oxidation of neglected car paint. Good for starter DIY guys who are getting into maintaining their own cars.

    Cleaning – FinishKare 215 treatment – Wax- is at least 2 day process for whole car.

    Note: For all car care compounds use, its important to shake the bottle for at least 1 minute before use & shake again in between if the process takes several hours.

    1. Dust the car or wash & dry the car (please use regular car shampoo without wax and no Polymer containing cleaning products), use the clay to remove embedded particles from Paint to clean up the paint or Swirl removing compounds to remove whatever swirls on the car.

    2. Take a 50 paisa size 215 on damp Terry pad with gripper & then rub until its over. Then again put same size & move to new portion.

    3. The way to apply 215 is you keep rubbing (small circles, panel by panel) it into paint until it almost disappears & then remove excess with MF in circles, wipe dry & buff in circles.

    Do not leave 215 over paint as if you are putting wax (no drying in most Indian Conditions), this process has to be continuous.

    After doing whole car with Finish Kare 215 you can take rest for a day, dust the car with MF next day & use Collinite Wax to seal the deal.

     

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.